Pt100 Temperature Sensor

The different Pt100 temperature sensor variants can be connected to our new generation oxygen, pH and CO₂ meters. They can be used to determine the temperature during experiments and for automatic temperature compensation of the measurements. It is recommended to connect a temperature sensor to the oxygen, pH or CO₂ meters when temperature changes are expected during experiments, to ensure correct temperature compensation and precise measurements. The standard temperature sensor (TEP) has a tip diameter of 3 mm, while the TEP-(FTC) variant has a smaller tip diameter (1.9 mm) so it can be integrated in flow-through cells or used if your application requires a narrower sensor. The third variant TEP-(FTM) can be integrated into metal flow-through cells with O₂ sensors FTM for monitoring in pipes. The TEP-OTR is a special temperature sensor with 1/8 “ thread that can be used with the Permeation Cell for oxygen transmission rate measurements. All temperature sensors are delivered with an ODU circular connector. The TEP-(FTC) and TEP-(FTM) are also available with open cable ends, so together with the Adapter Cable Pt100 for EOM they can be connected to DOTR EOM boards. It is also possible to attach a different connector type for 4-wire temperature sensors. We give a detailed description of attaching a connector to the open temperature sensor cable end in the Fibox 4 instruction manual.